The DX-BESS-50K130 is an advanced solar pv batteries solution designed for large-scale renewable energy storage and backup power applications.
As a leading solar pv batteries manufacturer, DX ENERGY utilizes high-voltage lithium iron phosphate (LiFePO4) battery technology to create an intelligent and safe system.
This modular solar pv batteries system features 133.12kWh of usable capacity from 13 battery modules 10.24KWH connected in series, operating at 400-800VDC.
It includes a built-in air conditioner to maintain temperatures below 40°C for optimal performance. An intelligent battery management system actively monitors and protects each solar pv batteries module, while the integrated energy management system supports key functions like black start and AC/DC coupling with solar PV.
With its cobalt-free, non-toxic LiFePO4 chemistry and IP55 enclosure, this eco-friendly solar pv batteries system allows versatile indoor or outdoor installation.
As an innovative solar pv batteries solution from focused on intelligent and green technologies, the DX-BESS-50K130 delivers reliable, efficient and safe renewable energy storage.
It comes with a 10 year warranty. The 50kW hybrid inverter supports both on-grid and off-grid applications, with 4 MPPTs, peak efficiency of 97.6% and full compliance to safety and emissions standards.
Features:
1. Intelligent temperature control
Built-in air conditioner, the maximum temperature of the battery is less than 40℃
2. Reliable
Positive Balance Intelligent BMS, providing complete protection, can effectively extend cycle life of battery packs
3. Flexible
EMS and BMS integrated technology, AC/DC power supply redundancy design, support black start function
4. Safer
Prismatic Lithium Iron Phosphate (LFP) Battery, The battery pack and system adopt an aerosol fire extinguishing solution
Technical Parameters:
| Model | DX-BESS-50K130 |
| System Specification |
| Nominal Output Power/UPS Power (W) | 50000 |
| AC Output Frequency and Voltage | 50/60Hz; 3L/N/PE 220/380, 230/400Vac |
| Grid Type | Three phase |
| Energy Configuration (kWh) | 133.12 |
| Dimension (W x D x H,mm) | 1400x1000x1650 (no contain inverter) |
| Weight Appr. (kg) | ~1500 |
| AC Output Rated Current (A) | 75.8 |
| Battery Operating Voltage (V) | 400 ~800 |
| Battery Chemistry | LiFePO4 |
| IP Rating of Enclosure | IP55 |
| System Certification | UN38.3, IEC62619, CE, CEI 0-21, VDE-AR-N 4105, IEC 62109 |
| Installation Style | Floor-Mounted |
| Warranty | 10 years |
| |
| Battery Technical Specification |
| Battery Module Nominal Voltage (V) | 665.6V |
| Battery Capacity | 200Ah |
| Battery Energy (kWh) | 133.12KWH |
| BMS Communication | CAN |
| BMS parallel support connection | 3sets |
| Max charge current | 100A |
| Max discharge current | 100A |
| Battery system Weight (kg) | 1420 |
| Operating Temperature Range | Charge: 0～55℃ / Discharge: -20℃～55℃ |
| Cycle Life | ≥6500(@25℃±2℃,0.5C/0.5C,70%EOL) |
| Battery Module Certification | CE, IEC62619, IEC62040, UN38.3, MSDS |
| Protection |
| Short circuit protection | YES |
| Over current protection | YES |
| Over charge protection | YES |
| Over temperature protection | YES |
| Cell over voltage protection | YES |
| Cell under voltage protection | YES |
| Over discharge protection | YES |
